LATITUDE 20
17.37m | Marlow | ME 57E
-
Marlow
Shipyard
-
ME 57E
Model
-
17.37m
Length
-
2007 Build/Refit
-
2 x 705 hp Caterpillar C12
Engines
-
Diesel
Fuel Type
-
Gold Coast, Australia
Location
-
6th July 2026
Listed Since
ME 57E Amenities
- Portuguese Bridge
Description
This remarkable yacht boasts enormous versatility and volume. Powered by dual 705hp Caterpillar C12’s this exciting vessel will take you to speeds in excess of 18 knots or effortlessly cruise at 12 knots. Having a 6,000-litre fuel capacity, she has ample range to explore the Great Barrier Reef and beyond throughout the Pacific.
The raised pilothouse, Portuguese bridge, wide side decks, combined with her state-of-the-art semi displacement hull makes the Marlow Explorer one of the most comfortable and safest yachts in any sea condition. The side decks are fully protected by fiberglass bulwarks topped with teak cap rails that are waist high aft and higher forward. The foredeck is accessed through the Portuguese bridge doors, where the twin stainless steel anchors are set up with the chain on a dual gypsy windlass and two seats for enjoying evening cocktails and watching the sun sets.
The Marlow Explorer is one of the few yachts in the world whose manufacturer has taken the time to optimise the basic hull design. When you see a Marlow Explorer on land you notice very quickly that the yacht is blocked at the bow like every other boat, but at the stern she is sitting on her own twin keels. The propellers are well above the bottom of the keels. What is not so obvious is how these strut keels will make the boat handle in a following sea. The lateral resistance provided makes the boat track straight with very little rudder correction required. The teak planks are epoxied to the deck which is moulded as one piece showing no seams from the transom to the bow, including the Portuguese bridge. The windshields and side windows are tinted glass and laminated with a layer of 3M Hurricane shield to a total thickness of 11mm, twice what most builders use in vessels below 100’.
Contact the yacht broker to receive full details and specifications, or to arrange a viewing of this Marlow for sale, located in Gold Coast, Australia.
Specifications
| LENGTH | BEAM | DRAFT |
|---|---|---|
| 17.37m | 5.46m | 1.74m |
| BUILT | SPEED | |
|---|---|---|
| 2007 | 12 - 18 Kts |
Principal Characteristics
- Builder Marlow
- Built 2007
-
Model
ME 57E
Dimensions
- Length 17.37m
- Beam 5.46m
- Draft 1.74m
Hull & Superstructure
- Hull Type Displacement
Speed & Range
- Max Speed 18 Knots
- Cruising Speed 12 Knots
Engine & Propulsion
- Engine Caterpillar C12
- HP 705hp
- Fuel Diesel
- Engine 2 Caterpillar C12
- HP 705hp
- Fuel Diesel
Accommodation
Asking Price
$1,800,000 USD (£1,348,870)