• Guests

    10

  • Cabins

    5

  • Crew

    5

Length GT Built
85' 11"
235 GT 2026
Beam Draft Top Speed
26' 7" 7' 10" 10.5 Kts

Due to be delivered in 2026, Sayna is a 26.2m expedition yacht built by Turkish shipyard Bering Yachts. Bering Yachts' team has created the interior and exterior design of the superyacht, alongside her naval architecture.

Key Features

  • More than 256sq/m (2,755sq/ft) of interior space
  • 26.2m (85.96ft) Bering 88 expedition yacht
  • Range exceeding 5,000 nautical miles
  • Accommodation for 10 guests in five cabins

Design & Construction

Designed around a displacement steel hull and an aluminium superstructure she features a 8.1m beam and a 2.4m draft. The yacht is built over 3 decks with an internal volume of 235 GT (Gross Tonnes).

Launched in March 2026 this yacht undertook sea trials over the following months.

Exterior Design

Sayna is the second hull in the Bering 88 explorer yacht series, built by Turkish shipyard Bering Yachts. Measuring 26.2m (85.96ft) overall, the yacht follows the yard’s established explorer formula, with a steel hull, high bow and broad superstructure that immediately signal long-range capability.

The profile is defined by strong horizontal lines and substantial deck levels, while the hull carries a dark finish below the waterline with a white superstructure above. Large hull windows cut into the sides bring light into the main deck interior and break up the yacht’s solid mass. The design relies on volume and stability rather than lightness, as the 8.1m (26.57ft) beam gives the yacht both a wide stance in the water and noticeably more interior space than most yachts of similar length.

Deck spaces are arranged for extended time outdoors. The aft deck offers room for open-air dining and lounge seating, while upper deck areas provide additional gathering space with clear views forward and aft. Wide side decks run along both sides of the superstructure, so crew and guests can move safely around the yacht even during longer passages.

The steel hull and substantial displacement of around 225 tonnes reinforce the expedition focus of the design, as the structure is intended for durability and offshore capability rather than lightweight performance.

Accommodation

Sayna accommodates up to 10 guests across five cabins, arranged to make full use of the yacht’s wide beam.

The owner’s stateroom sits on the main deck and spans the full width of the hull, benefiting directly from the 8.1m (26.57ft) beam. This configuration provides a noticeably larger sleeping and living area than most yachts in the mid-20-metre category, while also allowing generous wardrobe and storage space for long voyages.

Four additional guest cabins complete the guest accommodation, creating a balanced layout suited to family cruising or small charter groups. Each cabin includes its own en suite facilities, so guests retain privacy even during extended stays on board.

Separate crew quarters house up to five crew members, allowing the yacht to operate efficiently during long-distance passages while maintaining full service for guests.

Performance & Capabilities

Powered by twin diesel Cummins (QSM-11) 450hp engines, motor yacht Sayna is capable of reaching a top speed of 10 knots, and comfortably cruises at 8 knots. With her 39,755 litre fuel tanks she has a maximum range of 5,000 nautical miles at 8 knots.

Sayna Yacht is not For Sale

Motor yacht Sayna is off the market at the moment, but you can browse other Bering 88 Yachts for sale worldwide. For more options, check out all Bering Yachts for sale or search all new & used yachts for sale across the globe using YachtBuyer’s Market Watch.

If you're the yacht owner, broker, or captain, please use the "Update Sales Info" link to report any changes to the sales information. Update Sales Info